How to use Adblue Emulator for MAN Euro 6 Truck AdBlue Emulator

Adblue Emulator for MAN Euro 6 Truck is Original Man EURO 6 AdBlue Emulator New SRS. Need MAN Euro 6 Truck AdBlue Emulator user manual. Below OBD2Tuning.com sharing How to use Adblue Emulator for MAN Euro 6 Truck AdBlue Emulator.

Original Man EURO 6 AdBlue Emulator New SRS AdBlue Emulator DAF/VOLVO/SCANIA/MAN EURO 6



OBD2Tuning.com How to use Adblue Emulator for MAN Euro 6 Truck AdBlue Emulator: 

Adblue Emulator for MAN Euro 6 Truck from obd2tuning.com does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.

Next, you need to remove the fuses:

F894(Multisensor In AdBlue tank)

F738 (+30 Signal of AdBlue pump)

F1084 (NOx sensor Upstream)

Fuse F737 is now fuse of emulator.

Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.

Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.

OBD2Tuning.com Focus on OBD Tool Since 2008

https://www.facebook.com/obd2tuning/

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.