V40.09 CK-200 auto key programmer 2016 CK200 40.09 key programmer
OBD2Tuning.com CK-200 auto key programmer V40.09 CK200 Key Programmer 2016 CK200 software update guide:
1. Install the CK200 SETUP, run it, then click <Drive> for driving
2. For the first time, please install the driving.
3. Click <LOAD> to load the renewed data file.
4. Click <RENEW> to renew, after it finished, click <OK>.
5. PULL the ck 200 programmer out of PC, connect power, examine Version info.
How to use CK-200 auto key programmer from obd2tuning.com:
To make new car keys, It is use friendly according to CK200 key programmer V38.03 user manual, this user manual of CK-200 will guide you how to use ck-200 key programmer.
the operation guide of obd2tuning.com CK-200 key programmer:
Firstly, Prepared two keys, one key can start the engine, another one cannot (blank key) and connected cable to the device.Secondly, Connected CK200 auto key programmer v45.6 device into the OBD socket.Next, Turned on CK-200 pin code device.
Following was selecting car model according to CK-200 key programmer instructions.
Then, Inserted a key and turned the console.Turned ignition on then removed the key.After that, allowed to add a blank new key while left ignition off.Waiting for 45 seconds (max 60 seconds) until the safety access procedure was completed.Finally, blank key has been stored. Tried the second key and the engine can be started by the end.
OBD2Tuning.com Focus on OBD Tool Since 2008
https://www.facebook.com/obd2tuning/
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
沒有留言:
張貼留言