Porsche PIWIS Tester V17.100 PIWIS tester ii vci Porsche tester 2 Wlan setting guide

Porsche PIWIS Tester have 2 version, one is PIWIS tester ii vci without wifi, and the other is wifi Porsche tester 2. PIWIS tester ii vci wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi singal is really strong, which over 30 meters strong singal. Below OBD2Tuning.com sharing Porsche PIWIS Tester V17.100 PIWIS tester ii vci Porsche tester 2 Wlan setting guide. 

Piwis tester ii vci with V17.100 porsche piwis 2 software installed on panasonic cf-30 toughbook



Porsche PIWIS Tester V17.100 PIWIS tester ii vci Porsche tester 2 Wlan setting guide: 

A prerequisite for using wLAN is the availability of a suitable infrastructure. The workshop safety
guidelines must also permit the use of radio networks.
Connect the VCI to the PC using the supplied USB cable and start the VCI configuration software.
This can be accessed via the relevant link in the basic software.
The necessary setup steps are described separately in the section entitled wLAN configuration.

In order to establish a obd2tuning.com Porsche tester 2 wLAN connection, the USB connection must be removed once
configuration has been completed successfully.
This is because once established, the USB connection is always active.

OBD2Tuning.com PIWIS tester ii vci WIFI laptop connection

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER
Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2ECU chip tuning tool Center.