Piwis tester Porsche tester ii vci with V16.8 Porsche Piwis Tester 2 software Self-test not working solution

Piwis tester Porsche tester ii vci with panasonic cf-30 Laptop is powerful and professional diagnostic and programming tool for Porsche 2005-2014. Multi-language Porsche Piwis Tester II support key programming for old Porsche directly. Below OBD2Tuning sharing Piwis tester Porsche tester ii vci with V16.8 Porsche Piwis Tester 2 software Self-test not working solution. 

Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook

Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook

Piwis tester Porsche tester ii vci with V16.8 Porsche Piwis Tester 2 software Self-test not working solution: 

Tip 1, If the obd2tuning.com Porsche PIWIS tester self-check function is not working, do not click [Settings] – [VCI Configuration], otherwise you will get error.

Tip 2, Piwis hard disk is not compatible with other computer, but only CF30 packed with Piwis tester 2.Do not take out the hard disk from the CF30 laptop and install it on other computers, otherwise the data maybe get lost and hard to recover.

Obd365.com engineer advises piwis users follow his instructions step by step as shown below, improper operation will cause error:

Step 1.Start the car or turn on ignition.

Step 2.Connect PIWIS Tester to the car, wait until the indicator light flashes then connect USB cable to the computer.

Step 3.Choose car model you want to test.



Step 4.Enter PIWIS Tester II diagnostics interface.

Step 5.When the system appears “Control unit selection: Loading control unit selection”, it means Porsche PIWIS diagnostic software is working.

Please Kindly Notice: you won’t see control unit list if piwis not connect properly or piwis has something wrong.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Porsche Piwis Tester II vci software new update to V16.8 Porsche Piwis Tester 2 software

Porsche Piwis Tester II vci software new update to V16.8 Porsche Piwis Tester 2 software. OBD2Tuning.com V16.8 Porsche Piwis Tester 2 software installed on Panasonic CF30 laptop for Porsche diagnosis and programming. Porsche piwis tester ii V16.8000 cover full serial Porsche vehicles still 2016 except hybird vehicles.

Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook

Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook

V16.800 Piwis Tetser ii from obd2tuning.com never expiration date, which support offline progamming, also online programming for piwis tester II special functions, such as key programming etc.

OBD2Tuning.com have newest V16.800 Porsche piwis tester ii for sale, below customer can check V16.800 software screenshot for reference:

Piwis II Tester ii V16.8000 Software Display :

 

 

 

 

Please kindly note: the obd2tuning.com V16.800 Porsche piwis tester ii software not support update online,if customer try to update online it may be damaged, this is not under warranty.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Porsche Tester Porsche Piwis 2 vci software update to V16.8 Porsche Piwis Tester 2

Porsche Tester Porsche Piwis 2 vci is the professional diagnostic tool for Porsche. OBD2Tuning.com Porsche Tester Porsche Piwis 2 vci software update to V16.8 Porsche Piwis Tester 2. And we have Piwis Tester 2 Porsche Piwis Tester II with porsche diagnostic laptop can ready to use for sale.

V16.800 Porsche piwis ii software V16.8 Porsche piwis tester 2

V16.800 Porsche piwis ii software V16.8 Porsche piwis tester 2

Software Version: 16.8  Software will never expire!!

OS:XP system

Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch

Vehicle Coverage:

1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera

Porsche Piwis Tester II from obd2tuning.com Support Systems:

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II V16.800 Software display:

 

 

 

 

 

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Porsche Piwis Tester II with V16.8 Porsche PIWIS tester 2 software Porsche Piwis firmware update Manual

Porsche Piwis Tester II is the Porsche diagnostic& programming system. V16.8 Porsche PIWIS tester 2 software keep updating since released. How to do porsche piwis tester2 driver and firmware update? Below OBD2Tuning sharing Porsche Piwis Tester II with V16.8 Porsche PIWIS tester 2 software Porsche Piwis firmware update Manual. 

Piwis ii porsche tester V16.8 Porsche piwis 2 vci with Cf 19

Piwis ii porsche tester V16.8 Porsche piwis 2 vci with Cf 19

Newest piwis version:V16.800

Porsche Piwis Tester II with V16.8 Porsche PIWIS tester 2 software Porsche Piwis firmware update Manual: 

Make sure your PC get well network connection.
Ensure the Porsche piwis Tester ii vci from obd2tuning.com is connected with PC/laptop (do not need to connect with vehicle)

1) Open Porsche PIWIS software, select “Tools” function, click “Device update”

2) Then click “Update” to update obd2tuning.com Piwis tester 2 driver and firmware

3) VCX Device Firmware Updating. Do not interrupt!!!

4) Update Online Complete. Close obd2tuning.com V16.8 Porsche PIWIS tester 2 software program.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

How to do Porsche PIWIS Tester ii vci with V16.8 Porsche PIWIS Tester 2 software key programming function

Some customers may think that Porsche PIWIS Tester ii vci only have trouble diagnostic function. Do you know V16.8 Porsche PIWIS Tester 2 also can support make key learning online? Below OBD2Tuning sharing How to do Porsche PIWIS Tester ii vci with V16.8 Porsche PIWIS Tester 2 software key programming function. 

Piwis ii porsche tester V16.8 Porsche piwis 2 vci with panasonic cf 19 laptop 

How to do Porsche PIWIS Tester ii vci with V16.8 Porsche PIWIS Tester 2 software key programming function: 

Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function. 
First: If you have No Porsche Dealer Account, we can login our porsche dealer account via teamviewer for you, and it is 245 USD/time, for more details please CLICK HERE>>>

Second: If you have Porsche Dealer Account, and want to do online function with your account, we also can set that for you:
A--Please provide us your porsche certificatie
B--Please offer the password for importing the certificate
C--We need at least 5 days to install your certificate
D--Please pay extra 900 USD as install fee to us.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Porsche PIWIS Tester II Dev. Mode V16.8 Porsche piwis tester 2 Developer Engineer Mode set up guide

Porsche PIWIS Tester II diagnostic system and original VXDiag Multi Tool for Porsche. Both are compatible with three modes but only two modes can be available– E (Development) mode with German, V (Aftersales) mode with multi-language. Below OBD2Tuning sharing Porsche PIWIS Tester II Dev. Mode Porsche piwis tester 2 Developer Engineer Mode set up guide. 

Piwis ii porsche tester V16.8 Porsche piwis 2 vci with panasonic cf 19 laptop 

Piwis ii porsche tester V16.8 Porsche piwis 2 vci with panasonic cf 19 laptop 

Porsche PIWIS Tester II Dev. Mode V16.8 Porsche piwis tester 2 Developer Engineer Mode set up guide:

Here is the instruction on how to set up V16.8 Porsche PIWIS Tester II Development/Engineer Mode by yourself, if your PIWIS version doesn’t support Development Mode.

NOTE 1: Please first install WinRAR and Winhex on your computer. Then to do setup as follows.
Locate the file: C:\Program Files\Porsche\PIDT_P_MIG_DLSS3\pidt\plugins\de.dsa.pidt.datatype.jar and copy it on your desktop in order to modify it.2. Open it with WinRAR, and then in the WinRAR windows locate the file:
\de\dsa\pidt\datatypes\utils\Helper$1.class and drag it on your desktop, then delete it from the archive after the copy, and keep the WinRAR window open.
3. Open Helper$1.class on your desktop with Winhex and go to offset E81, replace 9A by A7 and save.
4. Drag back the save file on the WinRAR window still open and click OK. Now Close WinRAR.
5. Copy the new file de.dsa.pidt.datatype.jar you just made in C:\Program Files\Porsche\PIDT_P_MIG_DLSS3\pidt\plugins, and overwrite it.
6. Copy the file aftersales.sig on your desktop and rename it development.sig Copy this file back in the folder.
Aftersale.sig is located in
C:\Program Files\Porsche\PIDT_P_DLS3\Pidt\workspace
and in
C:\Program Files\Porsche\PIDT_P_MIG_DLS3\Pidt\workspace
7. Do exactly the same method given above with the folder
C:\Program Files\Porsche\PIDT_P_DLSS3 with its own files.
To transform it in developer:
Settings > Diagnostic configuration > 981-991 > mode > operating mode
E= development, P= production, V= aftersales (Regular PIWIS II)
Other models line > mode > operating mode
E= development, P= production, V= aftersales (Regular PIWIS II)
E= Entwickler, P= Produktion, V= Verkauf (Standarteinstellung PIWIS II)

NOTE 2: The Development Mode DIY guide here is a customer solution; obd365 has not tested yet and you may be at risks to have a try. Good luck.
What can you do with Porsche Piwis Development Mode?
1.start/stop”LAST MODE”wait for stopping the engine and change memory
2.spoiler”lessen time when the car starts
3.spoiler”fixed”
4.spoiler”change angle”
5.Change VO code
6.Close Air Mercury
7.Upgrade power
8.Remove the tire pressure sensor
9.Install reversing camera
10.Install USB/BT
11.Close the seat belt warning
12.Change CDR/PCM operation interface
13.Air condition memorization
14.Start CDR_AUX
15.Open the PCM function
16.Manually set codes
17.Automatically set codes
18.Manually do programming
19.Automatically do programming

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.